Description

Geekvape Wenax Sc Pod Kit

 

Wenax SC Pod kit:

Geekvape Wenax SC Pod kit 2ml 1100mAh is New finish with stunning new colors. New charge with Type-C port. Upgraded cartridge for better MTL experience. New mesh coil adopted for smoother flavor. With impressive 2 days use, Wenax Stylus is now shining bright like a diamond.

Wenax SC Pod kit The Geekvape Wenax SC Kit is the new addition to the Wenax Starter kit family.

The Wenax range has proved to be very popular and includes the K1, C1 and the original Wenax Stylus.

More Details On The Geekvape Wenax SC Kit :

As you can see this is designed to be a simple to use pod kit for starter vapers.

 

It ticks all the boxes with a few extra features too.

Inside the device is a 1100mAh battery which you charge via the USB Type C port at up to 1A charge rate – the charge time is not specified.

There are different output levels depending on which coil you install and which firing method you use.

• Draw activated (auto draw) firing – 0.6ohm coil = 14/15/16W, 1.2ohm coil = 9/10/11W
• Button activated firing – 0.6ohm coil = 16W, 1.2ohm coil = 11W.

This might sound confusing but basically you have 3 power levels (high, med and low) when you use the draw activated firing and a higher output if you use the button to fire.

There is an LED indicator to inform you of the battery charge remaining, fault conditions and the power level status/

Another great feature on this kit is the fact that you can just replace the coil when the coil performance has deteriorated. On earlier kits you would discard the whole plastic pod.

The coils are the Geekvape G Series of coils which are used in the Wenax Stylus, C1, Aegis Pod and G18 Pen and there are 5 variants to choose from. This kit includes the 0.6ohm and 1.2ohm Mesh coils.

The pod is refillable with up to 2ml of your own e-liquid via the side fill port. There is a 3ml pod available separately.

Here is an introduction video from Geekvape…

Kit Includes

• Wenax SC device
• 0.6ohm G Series coil (installed)
• 1.2ohm G Series coil
• Coil tool
• Delrin drip tip
• USB Type C Cable
• User manual

Geekvape Wenax SC Kit Specs

• Size: 112×18.8mm
• Output: Auto activation = 0.6ohm – 14/15/16W, 1.2ohm – 9/10/11W, Fire button activation = 0.6ohm – 16W, 1.2ohm 11W
• Battery: 1100mAh (internal)
• Display: LED
• Resistance limits: 0.5-3ohm
• E-liquid capacity: 2ml (3ml pod available separately)
• USB Type C Charging – 1A charge rate
• Pods: Refillable, replaceable coil
• Coils: G series coils –  0.6ohm mesh, 1.2ohm mesh
• 2 types of drip tip included
• Auto Draw or Button activated fire

Seeing as the Wenax kits already have a lot of fans – this new addition to the range adds some more features!

Let me know what you think of the Geekvape Wenax SC Kit in the comments below!